Enabling a PXE device and using it for booting
Preboot eXecution Environment (PXE) provides a mechanism for starting a computer through network interfaces. Once a PXE device is enabled in the BIOS of the computer, PXE can be used to boot the system.
Enabling a PXE device:
- During startup, press and hold or continuously press F2 to enter the BIOS Setup Utility screen.
- Select PXE Device Enable , press Enter, and select Enable from the displayed dialog box. Press Enter to confirm your selection, and press F10 to save the settings and exit.
To disable the PXE device, click PXE Device Enable , press Enter, and select Disable from the displayed dialog box.
PXE — грузим всё! Осваиваем мультизагрузку по локальной сети

Сегодня автоматизируется все больше задач, для максимальной отдачи серверов все шире используют виртуализацию. Но устанавливать операционки по-прежнему приходится. Каждый делает это по-своему: у кого-то полные карманы различных образов на все случаи жизни, кто-то по старинке носит с собой «барсетку» с дисками, а то и две. Как правило, администраторы выполняют эту работу с невеликим удовольствием. Давай посмотрим, как сократить время на тривиальные задачи, как научить компьютеры устанавливать системы самостоятельно, вообще без участия админа, используя при этом только локальную сеть.
Итак, сегодня мы научимся: устанавливать Windows и Linux по сети, грузить небольшие ISO-образы, полезный софт (всяких там Касперских, Акронис, WinPE, мемтесты), разворачивать тонкие клиенты и рулить ими. Чтобы, например, бухгалтер, работающая с 1С по RDP, не прибила тебя за то, что у нее слетела винда, а отчет нужно было подготовить еще вчера. Или скупой начальник, который не хочет обновлять свой комп, восхитился твоим профессионализмом, когда увидит, как на стареньких компах летает Windows 8. В достижении наших коварных целей нам поможет сервер, предоставляющий загрузку по сети (PXE).

Главное меню загрузки PXE, текстовый режим
Другие статьи в выпуске: 
Xakep #201. Как стать киборгом
У любого системного администратора в заначке есть универсальный USB-диск для экстренной реанимации компьютера. Согласись, было бы куда лучше иметь ту же функциональность, используя одну лишь сетевую карту. Нельзя при этом не отметить возможность одновременной работы с несколькими узлами сразу. Итак, исходя из наших потребностей у нас есть два пути решения: использовать PXE или LTSP.
LTSP нам не очень подходит: он призван грузить по сети ОС, установленную на самом сервере, что позволяет использовать приложения сервера LTSP. Это не совсем то, что нам нужно. PXE — инструмент для загрузки компьютера по сети без использования локальных носителей данных, так же как и LTSP. PXE позволяет организовать мультизагрузочное меню загрузки, аналогичное универсальному «USB-реаниматору».

Главное меню загрузки PXE, графический режим
Что будем реализовывать?
Началось все с необходимости иметь под рукой инструмент для удаленной установки Ubuntu/Debian Server по сети, с возможностью загрузки Live CD маленькой системы, вроде SliTaz или Kolibri OS.
Как говорится, аппетит приходит во время еды: намеченное не успели реализовать, а к плану добавился еще ряд «хотелок». В итоге список получился весьма внушительным.
- Тонкие клиенты на базе Thinstation Linux.
- Раздел Linux.
- Установка Ubuntu 14.04 x86.
- Установка Ubuntu 14.04 x64.
- Установка Ubuntu 12.04 x86.
- Установка Ubuntu 12.04 x64.
- Загрузка SliTaz Live CD.
- Установка Windows 2012.
- Установка Windows 7.
- Windows PE с пакетом полезного ПО.
- Acronis True Image.
- Legacy BIOS.
- UEFI.
- Legacy BIOS.
- UEFI.
Собираем все в кучу и взлетаем
В качестве дистрибутива для сервера выбор пал на Ubuntu Server 14.04.2 LTS. Можно остановиться на любой другой ОС, разница будет только в синтаксисе. Итак, приступим. Нам потребуется TFTP, DHCP (необязательно установленный на этом же сервере, в роли DHCP-сервера может выступить роутер), сервис для организации сетевой файловой системы NFS. Рассматривать будем только те настройки, которые нас интересуют в рамках темы. Первым делом установим все необходимое, предварительно сделав все обновления:
Параметр -y означает, что на все вопросы отвечаем согласием. Настройка TFTP сводится к правке пары строк в соответствующем месте:
Обрати внимание, параметр TFTP_DIRECTORY="/var/lib/tftpboot" указывает место расположения корневого каталога TFTP-сервера. После сохранения перезапускаем удобным для себя способом:
Далее настроим DHCP-сервер. Приведу простую конфигурацию файла /etc/dhcp/dhcpd.conf:
Данная конфигурация говорит о том, что DHCP-сервер работает в локальной сети 192.168.0.0/24. Клиенту присваиваются адреса из диапазона 192.168.0.150–192.168.0.200, им будут присвоены параметры шлюза — 192.168.0.1, DNS-сервера — 192.168.0.2 и 192.168.0.5. Класс pxeclients, а именно параметр filename — это имя файла загрузчика, расположенного в корневой папке TFTP-сервера, в нашем случае /var/lib/tftpboot/pxelinux.0, на сервере с адресом 192.168.0.10.
Syslinux. Ставим загрузчик
В качестве загрузчика будем использовать Syslinux. Последнюю версию можно взять здесь. Распаковываем и кладем в /var/lib/tftpboot следующие файлы: ldlinux.c32, libcom32.c32, pxelinux.0 и lpxelinux.0 и каталог boot, в который складываем chain.c32, ldlinux.c32, libcom32.c32, libcom32.elf, libutil.c32, linux.c32, memdisk, menu.c32, vesamenu.c32 (menu.c32 — только текстовое меню, vesamenu.c32 позволяет украсить меню, например добавив фон). Файл меню загрузки по умолчанию должен находиться в /var/lib/tftpboot/pxelinux.cfg/default и иметь вид
На этом этапе загрузчик должен работать и иметь единственный пункт меню «Загрузка с первого жесткого диска». Далее необходимо создать подменю. Чтобы не путаться и не городить огромные файлы, рекомендую вынести подпункты в отдельные файлы меню, например так:
Все, что относится к разделу меню Install/Boot Linux, вынесем в отдельный файл /var/lib/tftpboot/linux. Аналогично выносятся другие пункты меню. Остальные параметры загрузки рассмотрим при добавлении каждого пункта/продукта.
Раздел Linux. Готовим на примере Ubuntu 14.04
Первым пунктом ставим возврат в предыдущий раздел меню. Далее будет установка Ubuntu 14.04 i386 и amd64. Скачиваем образ Ubuntu 14.04 mini.iso, распаковываем, находим прямо в корне два файла: linux и initrd.gz. Напомню, что корневой каталог сервера для загрузки — это каталог TFTP-сервера /var/lib/tftpboot . Исходя из этого, располагаем файлы внутри tftpboot. В случае с установкой Ubuntu, например, в images/linux/ubuntu14/i386 для x86 и в /images/ubuntu14/amd64 для x64 архитектур соответственно. Заметь, пути указаны относительно каталога FTFP-сервера. Здесь можно задавать параметры для установки, для автоматизации процесса установки. Например, задать параметр установки в качестве окружения рабочего стола при установке Debian KDE: append desktop=kde . Следующим шагом запустим маленький SliTaz. Грузить ISO-образы будем через memdisk. Из листинга сверху видно раздел slitaz, memdisk у нас расположен в каталоге boot, сам образ — в каталоге images. Параметры аналогичны тем, что используются в мультизагрузочных дисках.
Тонкие клиенты / Thinstation Linux

Загрузка Thinstation Linux
Следующим шагом научим запускать тонкие клиенты. Образ Thinstation Linux можно скачать готовый в виде сборки, можно взять конструктор для сборки и собрать самостоятельно. Можно качнуть с GitHub. Будь готов, что в последнем случае для подготовки образа потребуется около 3 Гбайт свободного места и времени в районе часа. Подготовка образа из Git хорошо описана в статье на сайте quaded.com. Я взял сборку с сайта nixts.org. В образе, который мы используем, много «ненужных» файлов, потому что там сразу и загрузчик, и дефолтные конфиги. Берем ядро и образ файловой системы (initrd и vmlinuz), которые складываем, например, в /var/lib/tftpboot/images/thinstation/ . Файлы конфигураций ( thinstation.conf.network , thinstation.hosts , thinstation.conf-user ) располагаем в корневом каталоге TFTP-сервера! Thinstation позволяет при загрузке учитывать MAC-адреса, IP-адреса, определять имя и группировать клиентов, в зависимости от параметров регулировать загрузку, например уводить на разные RDP- или VNC-серверы, сессии. Это позволяет, например, наклепать кучу виртуалок с десктопными операционными системами и посадить каждого клиента на отдельную виртуалку. Для каждого клиента можно также отдельно задавать настройки доступа к локальным устройствам: принтерам, флешкам, дискам, приводам и так далее. В общем, каждый ограничен только своей фантазией, благо вариантов использования с описанием настроек в сети навалом.
Acronis
Продукты Acronis загружаются аналогично инсталляторам Linux-систем. Скачал в Сети первый попавшийся образ Acronis, исключительно в научных целях. Распаковал. Нас интересуют только два каталога: ADD12 и ATI2015. Внутри каждого каталога видим по два файла с одинаковым именем и разным расширением. Это сделано для загрузки на 32-битных и x64-системах. Если открыть файл menu.lst того же образа, можно посмотреть, что чему соответствует. Для удобства складываем True Image и Disk Director аналогичным образом. Создаем папку acronis в рабочем каталоге ( /var/lib/tftpboot ). В него копируем ADD12 и ATI2015 со всем содержимым. Для удобства продукты Acronis выносим в отдельный раздел меню, так же как и раздел Linux. В pxelinux.cfg/default добавляем:
Файл acronis приводим к такому виду:
Windows PE
Windows-образы грузить несколько сложнее. В реализации загрузки практически любого WinPE-образа с любым содержимым внутри нам поможет загрузчик WIMBoot. WIMBoot — это системный загрузчик WIM-образов по сети. Довольно хорошо о самом продукте рассказывается на сайте, там же есть ссылка на скачивание. На сайте Microsoft есть инструкция по созданию WIM-образов. Образ, с которым я работал, был щедро вручен мне нашим системным администратором с продуктами Акронис. Назывался он Acronis_WinPE_Sergei_Strelec_25.11.2013.iso . Распаковав его, увидел в папке source заветный образ acronis.wim . Для WIM-образов для большего порядка использую отдельный каталог wim. Чтобы не путаться, внутри сделал еще один каталог winpe. В него копируем acronis.wim . Еще нам потребуются два файла из каталога BOOT этого же образа: BCD, BOOT.SDI и файл BOOTMGR из корня образа. На этом образ можно закрыть, удалить, больше он не пригодится. Переходим к подготовке загрузчиков (WIMBoot и syslinux). Распаковываем куда-нибудь архив wimboot-latest.zip . Копируем загрузчик WIMBoot на сервер TFTP, для удобства в каталог boot. Поскольку образ содержит Windows PE и различное программное обеспечение, в том числе и Acronis, то отнести можно в любой раздел меню. Я расположил его в главном меню. Итак, в файл pxelinux.cfg/default вносим изменения:
Заключение
На этом всё. В следующей статье мы научимся подготавливать и добавлять Windows-образы, сетевой установке в ручном и автоматическом режимах. Добавим Kaspersky Rescue v10, ERD Commander, именуемый MSDaRT. Разберемся, как запускать диагностические утилиты на примере memtest, а также покажем, как украсить меню загрузки.
Александр «Plus» Рак
Участник сообщества OmskLUG. Заместитель начальника отдела сопровождения информационных систем ГКУ «Ресурсы Ямала».
What Is PXE?

What is PXE? PXE is abbreviate of the Preboot Execution Environment. It is a method of booting a terminal computer (client) using only its network card. The concept of PXE originated from the early days of protocols such as BOOTP/DHCP/TFTP, and by 2015 it has become part of the UEFI standard.
It is standards-based and you can use open-source software or vendor-supported products to implement it. PXE is a key part of the data center infrastructure because it can automatically configure servers or workstations over the network.
Having an in-depth knowledge of the PXE stack will benefit anyone engaged in infrastructure deployment of bare-metal servers, embedded devices, and IOT devices.
On the client-side, it requires only a PXE-capable NIC and uses a small set of industry-standard network protocols such as DHCP and TFTP. Here are more details of NIC, the DHCP server, and the TFTP server.
NIC
NIC refers to the Network Interface Controller. Many consumer-grade network cards do not have PXE capabilities. PXE-enabled NIC is the DE facto standard in data center-grade servers. Some PXE-enabled NICs even use open source PXE firmware.
DHCP
DHCP refers to the Dynamic Host Configuration Protocol. There are two types of actors in DHCP — the DHCP server and the DHCP client. DHCP supports a wide range of options that can be provided to network clients.
But usually, it consists of the IP address used by the client, the default gateway address and the DNS server used for name resolution. For PXE, this is an option that contains the server’s IP address, from which you can download its startup file.
TFTP Server
TFTP refers to the Trivial File Transfer Protocol. It is a simple UDP-based protocol for getting or sending files. The simplicity of it is great for implementation in a firmware environment with limited resources.
TFTP has no bells or whistles because of its simple nature. It only supports getting and putting files. No directory listing, so you need to know the exact path of the file to download. Besides, there is no authentication or authorization.
Although TFTP is still commonly used in PXE environments, advances in technology have led some PXE implementations to support more complex protocols such as HTTP or ISCSI.
PXE boot
Advantages of PXE Boot
This part is about the advantages of the PXE boot server. Besides, you can also know when to use it. The advantages of using the PXE boot server are as follows:
1. For the client machine, the operating system or even a hard disk is not necessary. Then the installers can be less technical.
2. When there is a hardware or software failure, the client computer can be restarted. This allows administrators to diagnose and possibly resolve issues and there will be less error-prone due to automation.
3. New computers can be easily added to the network because PXE is vendor-independent. Using it can reduce time spent per server and the installation tools are centralized and easier to update.
When you want to maintain or install the system for multiple computers without inserting a CD or USB into these computers one by one, you can try the PXE boot to install the system. If your computer does not start properly and cannot be started by loading an image file on the internal hard drive, you can also try the PXE boot.
If the client does not have a CD-ROM drive or USB port available or does not have a CD or USB image, then you can try the PXE boot to start multiple client computers in the LAN. You may need this post — How to Enable Wake-on-LAN in Windows 10.
How Does PXE Boot Work?
Now, let’s see how does PXE boot work. First, you should configure the DHCP server/scope Options 66 and 67 before the PXE network boots. The PXE boot process starts after the client computer is assigned with an IP address.
DHCP configuration process
1. The client computer sends a “discover” packet as a broadcast requesting network configuration. The DHCP server will receive this packet.
2. The DHCP server will send an “offer” packet to the client. After analyzing the packet, the client will be assigned the network parameters such as IP address, subnet mask, etc.
PXE boot process
1. DHCP will be notified by the client that it is using a PXE server. The Next Boot Server’s Next Boot Server’s IP address(Option 66) and the Boot Filename (Option 67) will be sent to the client by the server.
2. The client will contact the PXE boot server and request a boot file.
3. The PXE server will send the startup file to the client via Trivial File Transfer Protocol (TFTP).
4. In the DHCP server, Options 66 and 67 can be configured under range or server options. This helps to load and start the startup files of client computers.
How to Perform the PXE boot Windows 10?
Just now, I have introduced how PXE boot works. Now, let’s see how to perform the PXE boot Windows 10. There are two methods available. You can choose one based on your needs.
Perform the PXE Boot Windows 10 with MiniTool ShadowMaker
The first method for you is to use the professional backup software — MiniTool ShadowMaker. You can boot many computers from the microsystem in the network with the PXE Boot feature of MiniTool ShadowMaker. That is to say, the PXE Boot feature is used to make other client PCs boot from the same network.
After booting, all client PCs can back up, restore or clone with tools offered in Windows PE. All in all, the MiniTool PXE Boot feature makes it feasible that maintain multiple computers in LAN.
The backup feature of this software supports backing up your system drive completely, including system partition, system reserved partition and EFI system partition. In addition to restoring the system to the original device, you can also do the universal restore when restoring to a different computer with dissimilar hardware.
MiniTool ShadowMaker provides Trial Edition that gives you a 30-day free trial for all backup features. You can purchase its Pro Edition to use it permanently. Now you can try this software to perform the PXE boot Windows 10. You can follow the instructions step by step.
Step 1: Launch MiniTool ShadowMaker. Click Keep Trial, and click Connect in This Computer to enter its main interface.
Step 2: Navigate to the Tools tab and click the PXE part.
Step 3: Click the Start button to start the PXE service. MiniTool PXE Boot tool will configure related DHCP values automatically. You can click Settings to change the values before you click Start.
Step 4: MiniTool PXE Boot will start the service to connect client PCs. It may take several minutes. You just need to wait patiently.
Step 5: When the Connected to the server message appears, you can set the client PCs to boot from the network in BIOS. When all client PCs are booting from PXE network, you can maintain hard drives on many clients easily.
Step 6: After you finish the tasks, you can stop the PXE service by clicking Stop on the host computer.
Perform the PXE boot Windows 10 Without Software
You can also try performing the PXE boot Windows without software. This method is a little complex, you had better follow the steps patiently and carefully. Here is how to do that.
Step 1: Make sure that the PXE network environment is properly set up, that is to say, you should check if the DHCP server and the TFTP server is prepared. Then, enter BIOS by reading this post — How to Enter BIOS Windows 10/8/7 (HP/Asus/Dell/Lenovo, any PC).
Step 2: Then you should verify that PXE boot is enabled. Press the F2 key to access the Aptio Setup Utility > select Advanced in the top menu bar > select Network Stack.
Step 3: The server will be reset and the BIOS screen will appear again. Press the F8 key to specify a temporary boot device or press the F12 key to network boot (PXE).
Step 4: There are listing the available boot devices in the Please Select Boot Device menu. You need to select the PXE boot port, and press Enter.
Step 5: Now, complete the PXE installation by following the on-screen instructions.
Step 6: Then, follow the instructions for the post-installation tasks for your operating system. After that, you have performed the PXE boot Windows 10 successfully.
This post provides 2 methods to perform the PXE boot Windows 10, and I find that the method with MiniTool ShadowMaker is much better. Click to tweet
Final Words
To sum up, this post has introduced some information about the PXE boot. You can know what PXE is and the advantages of PXE boot as well as how it works. Besides, you can also learn how to perform the PXE boot Windows 10.
What’s more, if you have any problem with MiniTool ShadowMaker, please feel free to contact us via the email [email protected] and we will reply to you as soon as possible.
What Is LAN PXE Boot Option ROM? How To Use

The LAN PXE (Pre-Execution Environment) Boot Option ROM is a feature built into some computer motherboards. It enables the computer to boot from a network location instead of a local hard drive or other storage devices.
Please enable JavaScript
This feature is helpful in various situations, such as installing an operating system on a computer that lacks a local storage device or remotely performing maintenance or repair tasks on a computer.
To use the LAN PXE Boot Option ROM, you must first enable it in the computer’s BIOS (Basic Input/Output System) settings. A network boot server will also be required, providing the files and instructions required to boot the computer over the network.
This notification may come up as often as you try to exit your BIOS settings without touching anything. And so, you may be worried about what LAN PXE Boot Option ROM means, how it works, and whether you should disable it.
This article will provide answers to all your questions.
How the LAN PXE Boot Option Works
The network booting works by utilizing User Datagram Protocol (UDP), Internet Protocol (IP), Dynamic Host Configuration Protocol (DHCP), Trivial File Transfer Protocol (TFTP), and a bunch of network protocols to help IT managers handle client machines without a storage device.
As mentioned earlier, the LAN PXE Boot Option stands for Preboot Execution Environment, but many people like to pronounce it as a “pixie.”
With this LAN (local area network) boot option, network computers can boot over the network interface card instead of from a CD-ROM or hard disk.
After you’ve enabled the LAN PXE Boot Option ROM and configured the network boot server, you can boot the computer by pressing a key or selecting the network boot option in the BIOS settings. After that, the computer will connect to the network boot server and begin the boot process.
When to Use the LAN PXE Boot Option
- When your device has a network connection but no operating system or persistent storage on it, so when it boots up, it loads a pre-boot execution environment, which then loads a kernel, which further loads a complex environment. All these sit in the memory, and when that device shuts off, there is no persistent storage to back up.
- When your device has persistent storage but needs to bootstrap it in some way with an operating system, instead of walking around with a USB key or CD-ROM, you can boot it from the network and launch an installer for the OS of your choice. It could be a pre-built image that gets loaded.
- If you intend to re-image your system with a new Operating system or updated version because they have multiple personalities, a PXE boot option allows you to do that.
Should you activate the LAN PXE Boot option?
Yes, consider enabling the LAN PXE boot option, especially if you don’t have a disk environment and no operating system or persistent storage device.
PXE is enabled by default on all computers. To disable PXE, you must go into your BIOS settings. However, before making any decision, you should consider both sides.
First of all, PXE network booting is helpful in a diskless environment. The obvious advantage is that it doesn’t require an operating system or storage device.
But beyond that, this network booting option helps to conserve significant time and effort for IT managers, given that most tasks are performed remotely. Also, you can achieve centralized data storage, and controls are possible for improved security.
While the above proves that you should activate the LAN PXE Boot Option, there are problems associated with it—some of which I’ve experienced.
The first time I accidentally activated the “LAN PXE Boot Option ROM” option in the BIOS of my Gigabyte motherboard, the keyboard, mouse, and headphone lights did not come on after I restarted the computer; only the fans were running as the monitor failed to recognize the computer.
So again, it all comes down to what you want your computer’s boot option to be. If you choose to disable the LAN PXE Boot Option ROM option, here is how to go about it:
How To Disable LAN PXE Boot Option ROM
As mentioned earlier, the only way to disable the PXE network booting option is to access the BIOS setting, which is recognized as the System Setup screen on some computers.
While the procedure will vary depending on the vendor, here is the general way to disable it:
Step 1: Power up the computer and press the F2, F2, or ESP keys when the splash screen loads to access “Setup.”
Step 2: Navigate to the “Advanced tab” and click on the “Integrated Devices” option.
Step 3: Navigate to the “Network Interface Controller” option and then select “On” instead of “On with PXE.” The wording may vary depending on the vendor, but it will have a similar message. This way, you’d disable the PXE boot option.
If you cannot find the PXE option on your system, you should go to “Boot Order” under the “Advanced” tab and move the network card to the bottom of the boot order list.
This will allow your computer to boot from a hard drive or other media instead of a network interface card.
What does PXE boot allow?
PXE boot allows a computer to boot from a network location rather than a local storage device such as a hard drive or USB drive. This is useful in various situations, such as installing an operating system on a computer that lacks a local storage device or remotely performing maintenance or repair tasks on a computer.
To use PXE boot, you must first enable it in the computer’s BIOS (Basic Input/Output System) settings. A network boot server will also be required, providing the files and instructions required to boot the computer over the network.
After enabling PXE boot and configuring the network boot server, you can boot the computer by pressing a key or selecting the network boot option in the BIOS settings. After that, the computer will connect to the network boot server and begin the boot process.
PXE boot can be a quick and easy way to install or troubleshoot operating systems, especially in large organizations with multiple computers that need to be set up or maintained. It can save you time and money by allowing you to perform these tasks remotely rather than physically accessing each computer.
Why is my PC doing a PXE boot?
- The PXE boot option is enabled in the BIOS. If you enable the PXE boot option in your PC’s BIOS (Basic Input/Output System) settings, it will attempt to boot from a network location whenever you turn it on. To prevent this from happening, disable the PXE boot option in the BIOS.
- The network boot server is not responding: If you have a network boot server configured, but it is not responding or is having issues, your PC may be unable to complete the PXE boot process. You may need to troubleshoot the network boot server or try a different boot option.
- The hard drive or other local storagedevice is not bootable. If your PC’s hard drive or other local storage device is not bootable, the computer may be unable to boot from it and will instead attempt to boot from a network location. In this case, you may need to repair or replace the hard drive or another storage device.
- The boot order is set to boot from the network: Your PC’s BIOS settings determine the order in which it will attempt to boot from different devices. The computer will first attempt to boot from the network if the network appears before the hard drive or other local storage devices. To boot from a different device first, you can change the boot order in the BIOS settings.
Is PXE secure?
While PXE can be a quick and easy way to install or troubleshoot operating systems, it is important to be aware of its security risks.
One potential security risk of PXE is that it allows a computer to boot from a network location that unauthorized users could access. Suppose an attacker gains access to the network boot server or its configuration. In that case, they may be able to modify the boot files or instructions, allowing malicious code to be executed on the computer.
It is critical to secure the network boot server and its configuration to mitigate these risks and limit access to only authorized users. It is also a good idea to update the boot files and instructions regularly to ensure they are not vulnerable to attack.
Furthermore, the security risks of the operating system and other software installed or run via PXE must be considered. To protect against vulnerabilities, ensure that these software products are regularly updated and patched.
Finally
The bottom line is that the LAN PXE Boot Option ROM occurs when your system BIOS cannot boot to its hard disk drive. It is activated by default on computers.
Your computer will spend about 30 seconds querying the network for a PXE server. When none is found (suppose you aren’t on a corporate network where someone has set up a PXE server), it will go to the next boot option and boot up as usual.
Are you experiencing further complexities associated with the LAN PXE Boot Option ROM? Share in the comments, and I’d be happy to help.